KA-6130
Do you have memory for your computer but you aren't sure how to go about the installation? Visit our site for information on how to do just that. Not only do we sell it, but we can help you install it. Find here
mac memory, imac memory, dell latitude, Dimension 8100, mac ram, inspiron 7000, inspiron memory, k7s5a, dell ram, imac memory install, imac memory installation, imac ram installation, inspiron 8200 memory, mac memory ram, Dimension 4100, Dimension 8200, Dimension L500c, Dimension L566cx, Dimension L600cx, Dimension XPS T600, eTower 266, eTower 500id, eTower 500is, eTower 633irx, IM-600B, Inspiron 4100, Inspiron 8100, K7AMA, K7M, K7S6A, K7SEM, K7T266 Pro2-RU, K7VTA3, K7VZA, KA31, KA-6100, KA-6110, KA-6130, KA7, KA7-100What is the difference between 2-clock and 4-clock memory? Two types of SDRAM modules are the 2-clock and the 4-clock module. Structurally, they are the same, but they are accessed differently. A 2-clock SDRAM module is set up so that each clock cycle accesses two chips on the KA-6130 module. A 4-clock SDRAM setup accesses 4 chips per clock cycle. To choose what kind to get, you must look into the motherboard''s documentation. 4-clock modules are the more commonly used. The typical indication of the wrong type being used is a system giving error beeps and not booting as it cannot use the memory installed. The system will not proceed past POST (Power On Self Test). 2-clock was only used in 66 MHz systems. All PC 100 and PC 133 memory is 4-clock only. Do all of your SDRAM modules use SPD? SPD, or Serial Presence Detect, is a program in an EEPROM chip on the modules of SDRAM (Synchronous Dynamic Random Access Memory). It tells the system’s BIOS what the specifications and settings of the memory module are. All of our SDRAM DIMMs have SPD programming. The system BIOS should therefore be set on AutoDetection KA-6130 for memory.
What is the difference between 2-clock and 4-clock memory? Two types of SDRAM modules are the 2-clock and the 4-clock module. Structurally, they are the same, but they are accessed differently. A 2-clock SDRAM module is set up so that each clock cycle accesses two chips on the KA-6130 module. A 4-clock SDRAM setup accesses 4 chips per clock cycle. To choose what kind to get, you must look into the motherboard''s documentation. 4-clock modules are the more commonly used. The typical indication of the wrong type being used is a system giving error beeps and not booting as it cannot use the memory installed. The system will not proceed past POST (Power On Self Test). 2-clock was only used in 66 MHz systems. All PC 100 and PC 133 memory is 4-clock only. Do all of your SDRAM modules use SPD? SPD, or Serial Presence Detect, is a program in an EEPROM chip on the modules of SDRAM (Synchronous Dynamic Random Access Memory). It tells the system’s BIOS what the specifications and settings of the memory module are. All of our SDRAM DIMMs have SPD programming. The system BIOS should therefore be set on AutoDetection KA-6130 for memory.
Find here - Do you have memory for your computer but you aren't sure how to go about the installation? Visit our site for information on how to do just that. Not only do we sell it, but we can help you install it.
KA-6130
| ka31 | ka7 100 | ka7 | mac memory ram |
| mac memory | mac ram | macintosh iifx | macintosh lc |
hostmaster@installation-computer-memory.com
2003 installation-computer-memory.com.
All Rights Reserved. The products mentioned are trademarks of their respective owners and are not owned by us. Read our privacy guidelines.