K7M

Do you have memory for your computer but you aren't sure how to go about the installation? Visit our site for information on how to do just that. Not only do we sell it, but we can help you install it. Find here

What is the difference between 2-clock and 4-clock memory? Two types of SDRAM modules are the 2-clock and the 4-clock module. Structurally, they are the same, but they are accessed differently. A 2-clock SDRAM module is set up so that each clock cycle accesses two chips on the module. A 4-clock SDRAM setup accesses 4 chips per clock cycle. To choose what kind to get, you must look into the motherboard''s documentation. 4-clock modules are the more commonly used. The typical indication of the wrong type being used is a system giving error beeps and not booting as it cannot use the memory installed. The system will not proceed past POST (Power On Self Test). 2-clock was only used in 66 MHz systems. All PC 100 and PC 133 memory is 4-clock only. Do all of your SDRAM modules use SPD? SPD, or Serial Presence Detect, is a program in an EEPROM chip on the modules of SDRAM (Synchronous Dynamic Random Access Memory). It tells the system’s BIOS what the specifications and settings of the memory module are. All of our SDRAM DIMMs have SPD programming. The system BIOS should therefore be set on AutoDetection for memory.

What is the difference between 2-clock and 4-clock memory? Two types of SDRAM modules are the 2-clock and the 4-clock module. Structurally, they are the same, but they are accessed differently. A 2-clock SDRAM module is set up so that each clock cycle accesses two chips on the module. A 4-clock SDRAM setup accesses 4 chips per clock cycle. To choose what kind to get, you must look into the motherboard''s documentation. 4-clock modules are the more commonly used. The typical indication of the wrong type being used is a system giving error beeps and not booting as it cannot use the memory installed. The system will not proceed past POST (Power On Self Test). 2-clock was only used in 66 MHz systems. All PC 100 and PC 133 memory is 4-clock only. Do all of your SDRAM modules use SPD? SPD, or Serial Presence Detect, is a program in an EEPROM chip on the modules of SDRAM (Synchronous Dynamic Random Access Memory). It tells the system’s BIOS what the specifications and settings of the memory module are. All of our SDRAM DIMMs have SPD programming. The system BIOS should therefore be set on AutoDetection for memory.

Find here - Do you have memory for your computer but you aren't sure how to go about the installation? Visit our site for information on how to do just that. Not only do we sell it, but we can help you install it.

K7M

k7s5a	k7s6a	k7sem	k7t266 pro2 ru
k7vta3	k7vza	ka 6100	ka 6110
ka 6130	ka31	ka7 100	ka7
mac memory ram	mac memory	mac ram	macintosh iifx
macintosh lc 475	macintosh lc 580	macintosh lc

hostmaster@installation-computer-memory.com

2003 installation-computer-memory.com.

All Rights Reserved. The products mentioned are trademarks of their respective owners and are not owned by us. Read our privacy guidelines.